Caring For Your Meter And Lancing Device; Meter Specifications - Sanofi-aventis BG-STAR Owner's Manual

Hide thumbs Also See for BG-STAR:
Table of Contents

Advertisement

Time and Date Setting After Battery Replacement
If the date and time need to be set, the word "SET" will be
displayed the first time the meter is activated.
Note: The meter retains the date and time format [24 or 12 hour
time, M-d (Month-Day) or d-M (Day-Month)]
[1] Set the year (flashing) with the DOWN ( )
or UP ( ) arrow buttons. Press the CHECK ( )
button to confirm your selection and continue
on to the month setting.
[2] Set the month (flashing) with the DOWN ( )
or UP ( ) arrow buttons. Press the CHECK ( )
button to confirm your selection and continue
on to the day setting.
[3] Set the day (flashing) with the DOWN ( )
or UP ( ) arrow buttons. Press the CHECK ( )
button to confirm your selection and continue
on to the hour setting.
[4] Set the hour (flashing) with the DOWN ( )
or UP ( ) arrow buttons. Press the CHECK ( )
button to confirm your selection and continue
on to the minute setting.
60
[5] Set the minute (flashing) with the DOWN ( )
or UP ( ) arrow buttons. Press the CHECK ( )
button to confirm your selection. If the meter was
activated via strip insertion, pressing CHECK ( )
allows you to perform a test. If the meter was
activated via the CHECK ( ) button, the meter
will enter menu mode.
22
Caring For Your
Meter and Lancing Device
When using your meter, avoid getting dirt, dust, blood, control
solution, water or any other liquid into the strip port and
battery compartment. Clean the outside of the meter or the
lancing device using a cloth dampened with mild detergent
or mild soap. If you wish to clean the lancing device cap only,
remove the cap, wash it in warm water, rinse well, and dry.
CAUTION: Never immerse the meter or the body of the
lancing device in water or any other liquid solution.
23

Meter Specifications

Assay Method: Dynamic Electrochemistry
Maximum Altitude: 3.048 meters
Calibration: Plasma equivalent
Coding: No Code
Sample: Whole blood, capillary
Sample Size: 0.5 microliters
Average Glucose Test Time: 6 seconds
Measurement Units: mmol/L
61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents