Regulations And Standards; Conformance To Eu Directives - Omron NYP25-*-11 SERIES User Manual

Industrial panel pc ny-series

Table of Contents

Regulations and Standards

The Industrial Panel PC complies with EU Directives. To ensure that the machine or device in which

the Industrial Panel PC is used complies with EU Directives, the following precautions must be ob-

served:

• The Industrial Panel PC must be installed within a control panel.

• The Industrial Panel PC that complies with EU Directives also conforms to the Common Emission

Standard. Radiated emission characteristics (10-m regulations) may vary depending on the configu-

ration of the control panel used, other devices connected to the control panel, wiring, and other con-

ditions. You must therefore confirm that the overall machine or equipment in which the Industrial

Panel PC is used complies with EU Directives.

• This is a Class A product (for industrial environments). In a residential environment, it may cause

radio interference. If radio interference occurs, the user may be required to take appropriate meas-

ures.

Applicable Directive

EMC Directive

OMRON devices that comply with EU Directives also conform to the related EMC standards so that

they can be more easily built into other devices or the overall machine. The actual products have been

checked for conformity to EMC standards.

Applicable EMC (Electromagnetic Compatibility) standards are as follows:

• EMS (Electromagnetic Susceptibility): EN 61131-2

• EMI (Electromagnetic Interference): EN 61131-2 (Radiated emission: 10-m regulations)

Whether the products conform to the standards in the system used by the customer, however, must be

checked by the customer. EMC-related performance of the OMRON devices that comply with EU Di-

rectives will vary depending on the configuration, wiring, and other conditions of the equipment or con-

trol panel on which the OMRON devices are installed. The customer must, therefore, perform the final

check to confirm that devices and the overall machine conform to EMC standards.

NY-series Industrial Panel PC User's Manual (W555)

Table of Contents