Create A New Rescue Disk With The Rescue Disk Creator - Omron NYP25-*-11 SERIES User Manual

5 Installation
Creates a Windows System Repair Disk that will also include the MBR and the Windows partition.
This procedure requires a separate PC with Windows 7 and a DVD writer and also an external DVD
reader.
The Repair Disk gives following options:
• Startup Repair
Examines Windows 7's most integral files and repairs any missing or damaged files that may be
keeping Windows 7 from starting.
• System Restore
Restores your Windows system files to an earlier point in time. It does not affect your personal
files.
• System Image Recovery
Returns your PC to the condition it was in when you created the selected System Image backup.
Additional Information
• Refer to Create a Custom Backup with Windows Backup on page 7 - 9 for Windows Back-
up details.
• Refer to Create a Windows System Repair Disk on page 5 - 60 for Windows Repair Disk
details.
Select the Backup and Repair procedure or procedures that are most suitable for your situation.
5-9-1

Create a New Rescue Disk with the Rescue Disk Creator

A Rescue Disk is a disk with the Rescue Disk Utility that enables users to create a system backup and
to do a system restore.
A system backup contains the Windows partition, the boot partition and the MBR.
Prepare:
• The Rescue Disk Creator
Refer to Installation on page 3 - 15 for installation details.
• A USB storage device that has sufficient capacity to backup the content of the Panel PC. Note that
all content on this USB storage device will be erased during the Rescue Disk creation.
Use the following procedure to create a new Rescue Disk:
1
Connect a USB storage device that has sufficient capacity to backup the content of the Panel
PC.
2
Select the Windows Start Button.
3
In the search field, input Rescue.
4
Right-click Rescue Disk Creator and then select Run as administrator.
The Rescue Disk Creator Utility window opens.
5 - 58
NY-series Industrial Panel PC User's Manual (W555)