Omron NYP25-*-11 SERIES User Manual page 128

5 Installation
7
Mount the drive cover.
The lock lever will click when closed correctly.
8
Finalize the drive installation when the Panel PC installation is completed.
• If the drive is inserted in bay A:
(1) Install an operating system
(2) Power OFF and then Power ON
(3) Ensure the drive is functional and confirm normal operation.
If required set the drive as boot disk in the BIOS settings.
Refer to A-1-5 BIOS - Boot on page A - 10 for boot priority settings.
• If the drive is inserted in bay B:
(1) Ensure the drive is functional and confirm normal operation.
If the Panel PC has a Windows operating system and the storage drive is not visible in
Windows then the drive needs to be allocated.
The drive is installed and functional.
5 - 8
NY-series Industrial Panel PC User's Manual (W555)