Prior To Use Technical Specification Congratulations Item Detail Thank you for choosing our quality product. Please read the Indoor phone manual carefully before installing your system and follow all of Receiving Frequency Range 2.400 GHz 2.4835 GHz the directions to ensure proper installation. Monitor 2.4'' Color LCD 2.0 Mbps...
Page 3
Introduction Technical Specification Supports up to 4 outdoor units Item Detail 2.4'' (320x240) QVGA LCD display Outdoor phone Video resolution: 320 x 240, with 25pics per second Transmit Frequency Range 2.400 GH 2.4835 GHz Wide angle lens and LED for night vision Long standby doorbell (battery up to 2 years or connect with 2.0 M b p s Date Rate...
Unpacking Engineering Mode Once you have unpacked your product, make sure that all the Delete the Usege Mode parts shown below are available. If any pieces are missing or 1. Press and hold the beneath Menu at the same broken, please promptly call your dealer. time about 5 seconds in standby mode, then the display will show as follow: Registration...
Menu Description Layout Chapter 6: Snap Show Outdoor Phone The pictures will store in this menu, you can save or delete them. On the upper left of the picture will display the corresponding Speaker Outdoor phone’s number. 1.Press beneath Menu to display the main menu items. 2.Press Up or Down to choose...
Page 6
Menu Description Indoor Phone Chapter 4: Key Tone Every time you press a key, your handset acknowledges it with a key tone. You can disable the key tones for a silent use. In certain LCD display error conditions, a warning tone will sound when an incorrect key Navigation is pressed.
Installing Batteries Menu Description Chapter 2: Volume Indoor phone This function allows you to adjust the volume (9 levels are The rechargeable Ni-MH batteries (AAA size, 1.2 V, 800 mAh) adjustable) during a call. come with your phone. Install the batteries before use. 1.Press beneath Menu to display the main menu items.
Menu Description Outdoor phone Chapter 1: Date&Time 1.Install two C size batteries (not supplied) into the battery beneath Menu to display the main menu items. 1.Press compartment. 2.Press Up or Down to choose , then press 2.Drill four screws to fix the battery cover beneath Select.
Operations Installation Instruction Calling Indoor phone Indoor phone Connect the modular end of the AC In standby mode, press the Call button on the Outdoor phone. power adapter to the power jack of The corresponding indoor phone rings, and the image of the the charger, then plug the AC adapter visitor appears on the LCD of the indoor phone.
Page 10
Diagram Operations Monitor Connection Mode 1 About the monitor function, the LCD wiil automatically display the corresponding menu according to the registered Outdoor phones. 1. In the standby mode, press beneath Mon. 2. When registers one Outdoor phone. the LCD will display 1# Outdoor phone.
Page 11
Operations Operations Turning On / Off Register The Indoor phone can support up to 4 Outdoor phones. To turn the indoor phone on, press 1. When you have registered one Outdoor phone, the register To turn the indoor phone off, press interface will display as follow Register First, press the Call button of the Outdoor phone , then hold the...
Need help?
Do you have a question about the RD-30 and is the answer not in the manual?
Questions and answers