Advertisement
Quick Links
Quick-Start Guide
AZSA3000
Crusader II 370 v2 RTF: US
AZSA3000EU
Crusader II 370 v2 RTF: EU
AZSA3000UK
Crusader II 370 v2 RTF: UK
AZSA3000M1
Crusader II 370 v2 RTF: Mode 1 AU
AZSA3001
Crusader II 370 v2 PTF (Pair-To-Fly)
To download the full Owner's Manual &
Technical Information Guide, please visit
www.Ares-RC.com or scan the QR code with
your smart phone.
Distributed in the US by:
Firelands Customer Service/Product Support
1133 Libra Drive, Lincoln, NE 68512
www.firelandsgroup.com
1-800-205-6773
customerservice@firelandsgroup.com
Full manual available to download from: www.Ares-RC.com
Product specifications are subject to change without notice.
Due to ongoing development, the actual product may vary from
images shown.
This product contains chemicals known to the State of California
to cause cancer, birth defects and other reproductive harm.
This product is not a toy! (14+) Recommended for ages 14 and
up. Adult supervision required for ages under 18 years old.
Contains small parts, keep out of reach of children 3 years of
age and younger.
Distributed in the UK by:
J Perkins Distribution Ltd,
Lenham,
Kent, UK
ME17 2DL.
www.jperkins.com
Distributed in Australia by:
Model Engines (Aust.) Pty. Ltd.,
Unit 1, 158-168 Browns Road,
Noble Park,
Victoria,
3174,
Australia.
www.modelengines.com.au
Ph (03) 8793 5555
warranties@modelengines.com.au
MADE IN CHINA
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ares CRUSADER II
Summary of Contents for Ares CRUSADER II
- Page 1 AZSA3000UK Crusader II 370 v2 RTF: UK AZSA3000M1 Crusader II 370 v2 RTF: Mode 1 AU This product contains chemicals known to the State of California AZSA3001 Crusader II 370 v2 PTF (Pair-To-Fly) to cause cancer, birth defects and other reproductive harm.
- Page 2 QUICK-START GUIDE This Quick Start guide is written for the RTF (Ready to Fly) version of the Crusader II. If you have the PTF (Pair to Fly) version, your model comes complete with a pre-installed Hitec Red-enabled receiver. Simply pair (connect) with your existing 2.4GHz Hitec or Hitec Red-enabled transmitter using the pairing guide on last page of this Quick Start guide.
- Page 3 Join the two wing panels using the main spar noting that these do not Main Spar need to be glued together. Connect the aileron leads to the Y-lead extensions that are plugged into Channel 1 of the KA-6 receiver. Full manual available to download from: www.Ares-RC.com...
- Page 4 LED will stop glowing, whereupon the battery can be disconnected. Open the battery hatch on the underside of the fuselage, insert the LiPo and slide it as far forward as it will go. Full manual available to download from: www.Ares-RC.com...
- Page 5 Connect the battery to the Electronic Speed Controller (ESC). A series of three regular beeps, followed by two audibly dissimilar beeps will be heard indicating that the ESC is armed and operational. Full manual available to download from: www.Ares-RC.com...
- Page 6 Right rudder stick will response. Right rudder stick will move the rudder to the right. move the rudder to the right. Full manual available to download from: www.Ares-RC.com...
- Page 7 Moving aileron moves upward. Moving the aileron stick to the left will the aileron stick to the left will have an opposite effect. have an opposite effect. Full manual available to download from: www.Ares-RC.com...
- Page 8 Add the spinner backplate. Fit the propeller over the shaft and seat it comfortably against the upstands of the backplate. Add the washer then loosely fit the prop nut. Full manual available to download from: www.Ares-RC.com...
- Page 9 With the LiPo battery inserted, check that your Crusader sits level when balanced on either side of the fuselage at a point 60–70mm back from the leading edge of the wing. 60-70mm (2-3/8” to 2-3/4”) Full manual available to download from: www.Ares-RC.com...
- Page 10 We recommend that the services of an experienced model pilot be employed to assist with the first flight. Please see the full online manual for further information. Full manual available to download from: www.Ares-RC.com...
-
Page 11: Pairing Guide
If a mis-pair occurs simply turn off both units and begin the process again. You should now have full control of your Crusader. Return to Step 20 of this guide to complete the set-up of your model. Full manual available to download from: www.Ares-RC.com... - Page 12 QUICK-START GUIDE NOTE: If you experience any problems, please consult online troubleshooting guide. Full manual available to download from: www.Ares-RC.com 000638-001 (REV A)
Need help?
Do you have a question about the CRUSADER II and is the answer not in the manual?
Questions and answers