Supermicro X11SAT User Manual page 79

X11SAT/X11SAT-F User's Manual
Port 6 PCIe Speed
Use this feature to select the PCI Express port speed. The options are Auto, Gen1, Gen2,
and Gen3.
Port 6 Detect Non-Compliance
Select Enabled for the AMI BIOS to automatically detect a PCI-E device that is not compliant
with the PCI-E standards. The options are Disabled and Enabled.
PCH SLOT3 PCI-E 3.0 X1
Port 7 ASPM
Use this item to set the Active State Power Management (ASPM) level for a PCI-E device.
Select Auto for the system BIOS to automatically set the ASPM level based on the system
configuration. Select Disabled to disable ASPM support. The options are Disabled, L0s,
L1, L0s & L1, and Auto.
Port 7 L1 Substates
Use this feature to set the PCI Express L1 Substates. The options are Disabled, L1.1,
L1.2, and L1.1 & L1.2
Port 7 PCIe Speed
Use this feature to select the PCI Express port speed. The options are Auto, Gen1, Gen2,
and Gen3.
Port 7 Detect Non-Compliance
Select Enabled for the AMI BIOS to automatically detect a PCI-E device that is not compliant
with the PCI-E standards. The options are Disabled and Enabled.
PCH SLOT7 PCI-E 3.0 X4
Port 8 ASPM
Use this item to set the Active State Power Management (ASPM) level for a PCI-E device.
Select Auto for the system BIOS to automatically set the ASPM level based on the system
configuration. Select Disabled to disable ASPM support. The options are Disabled, L0s,
L1, L0s & L1, and Auto.
Port 8 L1 Substates
Use this feature to set the PCI Express L1 Substates. The options are Disabled, L1.1,
L1.2, and L1.1 & L1.2.
84