Supermicro X11SAT User Manual page 75

X11SAT/X11SAT-F User's Manual
CPU DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on the SA (System
Agent) side of the DMI Link. The options are Disabled and L1.
DMI Extended Sync Control
Use this feature to enable or disable the DMI extended synchronization. The options are
Disabled and Enabled.
DMI De-Emphasis Control
Use this feature to configure the De-emphasis control on DMI. The options are -6dB and
-3.5dB.
PEG Port Configuration
CPU SLOT6 PCI-E 3.0 X16
SLOT6 Max Link Speed
This feature allows the user to select PCI-E support for the device installed on SLOT6. The
options are Auto, Gen 1, Gen 2, and Gen 3.
SLOT6 Max Payload Size
Use this feature to select the PEG0 maximum payload size. The options are Auto, 128
TLP, and 256 TLP.
SLOT6 Power Limit Value
Use this feature to set the upper limit on the power supplied by the PCIE slot. Press "+"
or "-" on your keyboard to change this value. The default setting is 75.
SLOT6 Power Limit Scale
Use this feature to select the scale used for the slot power limit value. The options are
1.0x, 0.1x, 0.01x, and 0.001x.
CPU SLOT4 PCI-E 3.0 X8 (IN X16)
PEG1 Enable Root Port
Use this feature to enable or disable the PCI Express Graphics (PEG) device in the port
specified by the user. The options are Disabled, Enabled, and Auto.
SLOT4 Max Link Speed
This feature allows the user to select PCI-E support for the device installed on SLOT4. The
options are Auto, Gen 1, Gen 2, and Gen 3.
SLOT4 Max Payload Size
Use this feature to select the PEG0 maximum payload size. The options are Auto, 128
TLP, and 256 TLP.
80