Supermicro X11SAT User Manual page 12

X11SAT/X11SAT-F User's Manual
Peripheral Devices
•
One (1) USB 2.0 port on the rear I/O panel (USB0/1)
•
One (1) internal USB 2.0 header with two (2) USB connections on the motherboard for front access (USB2/3)
•
One (1) USB 3.0 port on the rear I/O panel (USB4/5)
•
Two (2) internal USB 3.0 headers with four (4) USB connections on the motherboard for front access (USB6/7, USB8/9)
BIOS
•
128 Mb SPI AMI BIOS
•
ACPI3.0, SMBIOS 2.7, Plug-and-Play (PnP), BIOS Rescue Hot-key, PCI F/W 3.0, SPI dual/quad speed support, RTC
wakeup
Power Management
•
Power button override mechanism
•
Power-on mode for AC power recovery
•
Intel® Intelligent Power Node Manager 3.0 (available when the Supermicro Power Manager [SPM] is installed and a
special power supply is used. See the note on page 20).
•
ACPI Management
•
Wake-On-LAN
•
Management Engine (ME) (with Client Platform Service)
System Health Monitoring
•
Onboard voltage monitoring for +1.0V, +3.3V, 3.3V standby, +5V, +12V, VBAT, CPU, Memory, PCH Temp., System Temp.,
Memory Temp.
•
CPU/system overheat LED and control
•
CPU Thermal Trip support
•
CPU Thermal Design Power (TDP) support of up to 95W (See Note 1 on next page.)
Fan Control
•
Fan status monitoring via IPMI connections
•
Dual cooling zone
•
Low-noise fan speed control
•
Pulse Width Modulation (PWM) fan control
System Management
•
Trusted Platform Module (TPM) support
•
PECI (Platform Environment Control Interface) 3.1 support
•
System resource alert via SuperDoctor® 5
•
SuperDoctor® 5, Watch Dog, NMI
•
Chassis intrusion header and detection
•
SUM (Supermicro Update Manager) InBand, SUM-OOB
Note: The table above is continued on the next page.
Motherboard Features
SM Flash UEFI BIOS
®
16