Supermicro X11SAT User Manual page 37

Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin definitions.
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be configured to function as a suspend
button (with a setting in the BIOS - see Chapter 4). To turn off the power in the suspend
mode, press the button for at least 4 seconds. Refer to the table below for pin definitions.
PWR LED
HDD LED
NIC1 Link LED
NIC2 Link LED
OH/Fan Fail LED
Power Fail LED
Ground
Ground
Reset Button
Pin Definitions (JF1)
Pins Definition
3 Reset
4 Ground
Power Button
Pin Definitions (JF1)
Pins Definition
1 Signal
2 +3V Standby
16 15
3.3 V
3.3V Stby
NIC1 Activity LED
NIC2 Activity LED
3.3V Stby
3.3V
Reset
Reset Button
Power Button
PWR
2 1
41
Chapter 2: Installation
1. Reset Button
2. PWR Button
2
1