Toshiba TECRA A8 series Maintenance Manual page 90

2 Troubleshooting Procedures
D port status
(F120)
F122
F124
FFFF
NOTE: Status outputted by the test means the last error detected in the debug port test.
2-42
Downloaded from www.Manualslib.com
Table 2-4-2 Debug port (Boot mode) error status (9/9)
Inspection items
Initialization of SC
Clears IRT status
Renewal of checksum of Runtime
side.
[CONFIDENTIAL]
manuals search engine
2.4 System Board Troubleshooting
Initialization of HW just before BOOT and waiting
the completion
Notifies the DVI connection status to VGA BIOS
(models supporting DVI)
Setting of battery save mode
Setting of date
Waiting for Bluetooth initialization completion
(models supporting Bluetooth)
Update of DMI Wakeup factor, Update of SM-BIOS
structure table
PCI device configuration space close
Cache control
Process for CPU
Make the CPU clock to be set by SETUP
Waiting of motor-off completion of disabled HDD
Final decision of USB FDD drive information
Post processing of PRE_BOOT_SETUP
Initializing PCI Express device (2)
Clear of PWRBTN_STS
Enabling POWER Button
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Details