Appendix Gbios Rewrite Procedures; Appendix G Bios Rewrite Procedures - Toshiba TECRA A8 series Maintenance Manual

Appendix G BIOS rewrite procedures

Appendix G
Appendix G BIOS rewrite procedures
This Appendix explains how to rewrite the system BIOS program when you update the
system BIOS.
Tools
To rewrite the BIOS, you need the following tool:
Rewriting the BIOS
1. Set the system to boot mode.
2. Turn off the power to the computer.
3. Remove the external cable and PC card.
4. Connect an USB FDD and insert the BIOS/EC/KBC rewriting disk into the USB
5. Turn on the power while holding down the tilde character key until a beep sounds.
6. The BIOS rewriting starts
7. When the process is completed, it beeps and the system automatically reboots.
:
NOTE
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Downloaded from www.Manualslib.com
BIOS/EC/KBC rewriting disk for the computer that has renewed BIOS data.
FDD.
For example
(US Keyboard)
(UK Keyboard)
(There is the key at the left side of the 1 key in the UK key board.)
1. Connect the AC adapter to the computer when you rewrite the BIOS.
2. Do not turn off the power while you are rewriting the BIOS. If the rewrite
fails, it might be impossible to start up the computer.
3 If you fail to rewrite BIOS, then when you next turn on the power, a message
may be displayed that the contents of the BIOS have been erased. In this
case, insert the BIOS rewriting disk and the BIOS will be rewritten.
manuals search engine
Appendices
[CONFIDENTIAL] G-1