Battery Pack - Toshiba TECRA A8 series Maintenance Manual

Personal computer
Hide thumbs Also See for TECRA A8 series:
Table of Contents

Advertisement

4 Replacement Procedures
4.2

Battery pack

Removing the Battery pack
To remove the battery pack, follow the steps below and refer to Figure 4-1 and 4-2.
CAUTION: When handling battery packs, be careful not to short circuit the terminals.
1. Turn off the power of the computer.
2. Disconnect the AC adapter and other external devices from the computer.
3. Turn the computer face down.
4. Release the battery lock. Insert your finger tip in to the slit and take out the battery
pack while sliding the battery latch as shown in the following figure.
NOTE: For environmental reasons, do not throw away a spent battery pack.
4-8
Downloaded from
www.Manualslib.com
Also do not drop, hit or apply impact, do not scratch, break, twist or bend
the battery pack.
Slit
Battery latch
Battery lock
Figure 4-1 Removing the battery pack
[CONFIDENTIAL]
manuals search engine
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)

4.2 Battery pack

Battery pack

Advertisement

Table of Contents
loading

This manual is also suitable for:

Satellite pro a120

Table of Contents