Toshiba TECRA A8 series Maintenance Manual page 260

4 Replacement Procedures
NOTE: The following steps describe how to disassemble the HDD assembly, however, do
4. Place the HDD assembly on a flat surface, and remove the following screws.
5. Separate the HDD and HDD Holder.
CAUTION: Do not apply pressure to the top or bottom of the HDD.
4-14
Downloaded from www.Manualslib.com
not disassemble if the HDD is working properly.
•
M3×4C FLAT HEAD screw
M3×4C FLAT HEAD
HDD
Figure 4-7 Separating the HDD and HDD holder
[CONFIDENTIAL]
manuals search engine
×4
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
4.5 HDD
HDD Holder
M3×4C FLAT HEAD