Optical Drive Troubleshooting - Toshiba TECRA A8 series Maintenance Manual

2 Troubleshooting Procedures
2.9

Optical Drive Troubleshooting

This section describes how to determine if the optical drive (DVD-ROM&CD-R/RW or
DVD Super Multi drive) is functioning properly. Perform the steps below starting with
Procedure 1 and continue with the other procedures as required.
Procedure 1
The CD-ROM/DVD-ROM test program is stored in the Diagnostics Disk.
For the test, prepare test Media.
Then insert the Diagnostics Disk in the USB floppy disk drive, turn on the computer and run
the test. Refer to Chapter 3, Tests and Diagnostics, for more information about the
diagnostics test procedures.
If any errors occur while executing the CD-ROM/DVD-ROM test, go to Procedure 2.
2-58
Downloaded from www.Manualslib.com
Procedure 1: Diagnostic Test Program Execution Check
Procedure 2: Connector Check and Replacement Check
Diagnostic Test Program Execution Check
[CONFIDENTIAL]
manuals search engine

2.9 Optical Drive Troubleshooting

TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)