L-Acoustics KIBUII Rigging Manual page 24

Rigging procedures
Assembly
Procedure
1. Secure KIBU-SB on SB15m.
Use the coupling bars provided with the KIBU-SB.
Secure the coupling bars with the locking tabs.
Make sure the safety label on each locking tab is fully covered.
Make sure the lugs are in the notches.
2. Lift the array.
3. Position a SB15m under the assembly.
4. Lower the array until it rests on the subwoofer
Kiva II rigging manual (EN) version 2.0
CLICK !
24