Engine Oil Recommendation - TOHATSU MD 40B2 Owner's Manual

40
PRE-OPERATING PREPARATIONS
1. Air vent screw
2. Fuel tank cap
2. Loosen the tank cap until it contacts
the tab lock and release internal pres-
sure completely. After that, press down
6
the tab lock and open the tank cap.
3. Fill the fuel carefully not to over flow.
SAFE FILL
LEVEL
25 L
NIVEAU
MAXIMUM
4. After filling the tank, close the fuel tank
cap until two clicks sound is heard.
ENOM00037-B

3. Engine oil recommendation

ENOW00022-A
The engine oil is drained for shipping from
the factory. Be sure to fill the engine to the
proper level before starting engine. (To
1
2
ENOF00029-0
ENOF00030-A
CAUTION
properly fill the engine with oil follow the
instructions, See page 74)
1
3
1. Genuine of recommended engine oil
2. Filler lid
3. Oil tank cap
Use a genuine engine oil or recommended
one. Refer to your Distributor.
Will not recommended use of other two
stroke engine oil.
ENOW0002A-A
CAUTION
Use of engine oils that do not meet these
requirements will result in reduced engine
life, and other engine problems.
ENOW00603-0
CAUTION
Do not mix different brands of oil. Mixing
different brands of oil, or different types of
oil even if the brand is the same, may cause
gelling, resulting in possible filter screen
blockage. This could result in serious
engine damage because of impaired lubri-
cation performance.
2
ENOF00641-0