TOHATSU MD 40B2 Owner's Manual page 63

ENOM00063-0
Tilt down
Pull the reverse lock lever upward until it
stops. (This is the tilt down position.) Now,
lift up the outboard motor slightly, and then
allow gravity to lower it for you.
1
2
3
1. Reverse lock lever
2. Tilt up position
3. Tilt down position
ENOM00069-A
Power Trim & Tilt type
Tilt up
1. Operate the Power Trim & Tilt switch
and tilt the outboard motor up.
2. Lock the tilt with the Tilt stopper after
the outboard motor has been tilted up
Tilt down
1. Release the tilt stopper from the set-up
position while slightly tilting up out-
board motor.
2. Operate the Power Trim & Tilt switch
and tilt the outboard motor down until
the motor touches to the thrust rod.
ENOF01317-0
40, 50
1
1. Tilt stopper
75, 90, 115
ENOF00059-0
1. Tilt stopper
The outboard motor can also be tilted up
and down using the switch provided under
the bottom cowl.
ENGINE OPERATION
UP
DN
1
63
UP
DN
ENOF00067-A
ENOF00067-0
7
ENOF01318-0
ENOF01319-0