Cold Weather Precautions; Striking Underwater Object; Operation With Multiple Outboard Motors - TOHATSU MD 40B2 Owner's Manual

Hide thumbs Also See for MD 40B2:
Table of Contents

Advertisement

4. Inject a sufficient amount of engine oil
through the spark plug holes.
Pull the emergency starter rope several
times to circulate the oil throughout the
outboard motor.
ENOM00106-A

6. Cold weather precautions

If you moor your boat in cold weather at
temperatures below 0°C (32°F), there is
the danger of remained water freezing in
the cooling water pump, which may dam-
age the pump, impeller, etc. To avoid this
problem, submerge the lower half of the
outboard motor into the water.
ENOM00107-A

7. Striking underwater object

ENOW00935-0
CAUTION
Striking the sea bottom or an underwater
object may severely damage the outboard
motor.
Follow the procedure below and consult a
dealer as soon as possible.
1. Stop the engine immediately.
2. Check the control system, gear case,
boat transom etc.
3. Return to the nearest habor slowly and
carefully.
4. Consult a dealer check the outboard
motor before operation again.
INSPECTION AND MAINTENANCE
ENOM00121-0
8. Operation with multiple
outboard motors
When operating the outboard motors in
reverse at more than the lowest speed, be
sure that all engines are running.
If any engine has stopped, be sure to tilt
the outboard motor up and keep its pro-
peller out of the water.
Otherwise, water could enter the engine
and cause damage to it.
95
ENOF01145-0
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Md 90c2Md 115a2Md 75c2Md 50b2

Table of Contents