TOHATSU MD 40B2 Owner's Manual page 58

58
ENGINE OPERATION
1. Throttle grip
2. Put the shift lever in the Neutral posi-
tion.
Run the engine for 2-3 minutes at
idling speed for cooling down if it has
been running at full speed.
7
3. Turn the main switch key to the OFF
position or push the stop switch. ( Do
not forget to turn the key off).
R
3
OFF
ON
START
PUSH TO IDLE CHANGE
1. Throttle grip
2. Shift lever
3. Main switch key
1
ENOF00866-0
N
2
F
ENOF00880-0
Side mount RC type
1. Put the control lever in the Neutral
position and run the engine for 2-3
minutes at idling speed for cooling
down if it has been running at full
speed.
N
1
2. Turn the main switch key to the OFF
position or push the stop switch. ( Do
not forget to turn the key off).
OFF
1. Control lever
2. Main switch key
ENOW00869-0
WARNING
After stopping the engine:
Close the air vent screw on the fuel tank
cap.
Disconnect the fuel connector of the
engine and the fuel tank.
Disconnect the battery cord, after each
use.
2
ENOF00881-0
ON
START
2
ENOF00882-0