Default Settings - Cisco MDS 9000 series Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Example 3-5
switch# show san-ext-tuner interface gigabitethernet 3/1 nport pWWN 10:0:0:0:0:0:0:1 vsan
91
Node name
Port name
Transfer ready size
Example 3-6
switch# show san-ext-tuner nports
----------------------------------------------------------------------------
Interface
----------------------------------------------------------------------------
GigabitEthernet3/1
Default Settings
Table 3-1
Table 3-1
Parameters
Tuning
Transfer ready size
Outstanding I/Os
Number of transactions
Data generation format
filemark-frequency
Cisco MDS 9000 Family NX-OS IP Services Configuration Guide
3-10
Displays the Transfer Ready Size Configured for a Specified N Port
: 10:00:00:00:00:00:00:00
: 10:00:00:00:00:00:00:01
: all
Displays All Virtual N Ports Configured in This Switch
NODE NAME
10:00:00:00:00:00:00:00
lists the default settings for tuning parameters.
Default Tuning Parameters
Chapter 3
PORT NAME
10:00:00:00:00:00:00:01
Default
Disabled
Same as the transfer size in the SCSI write command
1
1
All-zero format
0
OL-19525-01,Cisco MDS NX-OS Release 4.2(1)
Configuring the SAN Extension Tuner
VSAN
91