Cisco MDS 9000 series Configuration Manual page 185

Chapter 5 Configuring IP Services
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 5-5
route 10.10.10.10.0 255.255.255.0 next_hop 11.11.11.35
IP default-gateway 10.10.10.35 next_hop 11.12.12.34
To configure an overlay VSAN (using the example in
Command
Step 1
switch# config t
Step 2
switch(config)# vsan database
switch-config-vsan-db#
Step 3
switch-config-vsan-db# vsan 10 name MGMT_VSAN_10
switch-config-vsan-db#
Step 4
switch-config-vsan-db# exit
switch(config)#
Step 5
switch-config-vsan-db# vsan 11 name MGMT_VSAN_11
switch-config-vsan-db#
OL-19525-01,Cisco MDS NX-OS Release 4.2(1)
Multiple VSAN Configuration Example
route 0.0.0.0 0.0.0.0 next_hop 10.10.10.35
If vsan10 - 10.10.10.88
VSAN 10
If vsan10 - 10.10.10.35
VSAN 10 default
gateway
If vsan10 - 11.11.11.35
If vsan11 - 11.11.11.34
VSAN 11 default
gateway
172.23.84.74
172.23.84.86
IP cloud
ip route 10.10.10.0 255.255.255.0 172.23.84.74
ip route 11.11.11.0 255.255.255.0 172.23.84.74
Physical Fibre
Channel Fabric
If vsan10 - 10.10.10.124
VSAN 11
If vsan11 - 11.11.11.72
NMS
Figure 5-5), follow these steps:
Purpose
Enters configuration mode.
Configures the VSAN database.
Defines the VSAN in the VSAN database
on all of the switches in VSAN 10.
Exits the VSAN database configuration
submode.
Defines the VSAN in the VSAN database
on all of the switches in VSAN 11.
Cisco MDS 9000 Family NX-OS IP Services Configuration Guide
Configuring Multiple VSANs
5-15