Chapter 4
Configuring iSCSI
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
iSCSI High Availability
The following high availability features are available for iSCSI configurations:
•
•
•
•
Transparent Target Failover
The following high availability configurations are available:
•
•
iSCSI High Availability with Host Running Multi-Path Software
Figure 4-15
multi-path software. In this scenario, the host has four iSCSI sessions. There are two iSCSI sessions from
each host NIC to the two IPS ports.
OL-19525-01,Cisco MDS NX-OS Release 4.2(1)
Transparent Target Failover, page 4-59
Multiple IPS Ports Connected to the Same IP Network, page 4-63
VRRP-Based High Availability, page 4-64
Ethernet PortChannel-Based High Availability, page 4-65
iSCSI high availability with host running multi-path software
iSCSI high availability with host not having multi-path software
shows the physical and logical topology for an iSCSI HA solution for hosts running
Cisco MDS 9000 Family NX-OS IP Services Configuration Guide
iSCSI High Availability
4-59