New And Changed Information - Cisco MDS 9000 series Configuration Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

New and Changed Information

As of Cisco MDS NX-OS Release 4.2(1), software configuration information is available in new
feature-specific configuration guides for the following information:
•
•
•
•
•
•
•
The information in these new guides previously existed in the Cisco MDS 9000 Family CLI
Configuration Guide and in the Cisco MDS 9000 Family Fabric Manager Configuration Guide. Those
configuration guides remain available on Cisco.com and should be used for all software releases prior
to MDS NX-OS Release 4.2(1). Each guide addresses the features introduced in or available in a
particular release. Select and view the configuration guide that pertains to the software installed in your
switch.
For a complete list of document titles, see the list of Related Documentation in the "Preface."
To find additional information about Cisco MDS NX-OS Release 4.2(x), see the Cisco MDS 9000 Family
Release Notes available at the following Cisco Systems website:
http://www.cisco.com/en/US/products/ps5989/prod_release_notes_list.htm
About this Guide
The information in the new Cisco MDS 9000 NX-OS IP Services Configuration Guide previously existed
in Part 6: IP Services of the Cisco MDS 9000 Family CLI Configuration Guide.
Table 1
Table 1 New and Changed Features for Cisco MDS NX-OS Release 4.2(x)
Feature
CCP and IP Route
OL-19525-01,Cisco MDS NX-OS Release 4.2(1)
System management
Interfaces
Fabric
Quality of service
Security
IP services
High availability and redundancy
lists the New and Changed features for this guide, starting with MDS NX-OS Release 4.2(1).
New or Changed Topics
Added procedure to configure an
IP Route using Fabric Manager.
Changed in Release Where Documented
4.2(1) Chapter 5, "Configuring IP Services."
Cisco MDS 9000 Family NX-OS IP Services Configuration Guide
xiii