Table of Contents
Advertisement
the digital ouput of the DVD player is set
to PCM mode.
•
Check that the [MIN VOLUME] is not
set to zero (see 'Configure the sound
settings' on page 18).
Communication issues
The TV does not communicate with the
external device:
•
Select the correct communication source.
•
Check that the card slot is enabled, if you
want to use the system/smart card.
Guest RC does not work
The guest remote control does not work:
•
Change the batteries if they are weak or
old.
•
Check the orientation of the batteries
and make sure that they are inserted in
accordance with the +/- orientation.
•
If the remote control is locked, unlock the
remote control (see 'Enable or disable
the remote control' on page 19).
Other issues
The character 'F' appears on screen:
•
This means that the TV is in factory
mode. Press MENU at the side of the
TV for a few seconds to reset the TV to
normal mode.
Contact us
If you cannot resolve your problem, refer to
the FAQs for this product at www.philips.
com/support.
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in the Addendum.
Warning
•
Do not attempt to repair the product yourself.
This may cause severe injury, irreparable
damage to your product or void your
warranty.
Note
•
Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
This text appears in the PL_PL (Polish)
language only.
Insert at the end of the troubleshooting
section.
---
Uwaga
• W odbiorniku wysokie napięcie! Przed
zdjęciem obudowy wyjqć wtyczkę z gniazda
sieciowego!
EN
Hide quick links:
Advertisement
Table of Contents
