automatically to standby when the
SCART signal is removed.
•
[NO]: Disables automatic detection
of SCART signal.
Insert RGB
1
Enter the setup menu.
2
Press
to select [CONFIGURATION]
> [CONTROL] > [ALWAYS RGB].
3
Press
to select one of the
following options:
[AV1]: Allows RGB insertion in AV1
•
(EXT 1) and other sources.
[AUTO]: Allows RGB
•
insertion in any source when
[COMMUNICATION] in the setup
menu is selected as [SP-SPI] or
[SP-I2C]. Otherwise, allows RGB
insertion in AV1 (EXT 1) only.
[NO RGB]: Prevents RGB insertion
•
in any source.
•
[NO]: Allows RGB insertion in AV1
(EXT 1) only.
Select the energy saving
option
1
Enter the setup menu.
2
to select [CONFIGURATION]
Press
> [ENERGY SAVING].
ENERGY SAVING
ENERGY SAVING
LOW POWER STANDBY
LOW POWER STANDBY
ESP
ESP
SMART POWER
SMART POWER
3
•
•
•
CLOCK
CLOCK
2
2
LOW
LOW
Press
to set the energy saving
options:
[LOW POWER STANDBY]: Defines the
power consumption for the TV when it is
in standby mode:
[GREEN]: Achieves minimum power
•
consumption. [COMMUNICATION]
is disabled in this mode.
[FAST]: Achieves fast power up.
•
[CLOCK]: Achieves low power
•
consumption when the clock is
displayed and [COMMUNICATION]
is enabled.
[ESP]: Set a time from 1 - 99 hours to
enable ESP. If the TV does not receive any
command for this time period, it enters
the standby mode to save energy. Select
[OFF] to disable ESP.
[SMART POWER]: Selects a power
saving mode. Select [HIGH] for
maximum power savings. Select
[MEDIUM] and [LOW] for less power
savings. Select [OFF] to disable the
power saving mode.
EN
21