Contents 1 Notice 2 Important 3 TV overview Side controls Guest menu Access the guest menu with PBS setup remote control Access the guest menu with guest remote control 4 Access and use the setup menu Navigate the setup menu Select a language Select the country Set the type of communication...
Page 5
(vedere indicazioni sull’etichetta nel retro della televisione) risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 gosto 1995 n. 548. Fatto in Székesfehérvár, il 02 Febbraio 2009 Philips Consumer Lifestyle Philips Ltd. Assembly Centre Hungary Székesfehérvár, Holland Fasor 6, Hungary This text appears in the ES_ES (Spanish European) language only.
Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. •...
Page 7
• Risk of injury, fire or power cord damage! Never place the TV or any objects on the power cord. • To easily disconnect the TV power cord from the power outlet, ensure that you have full access to the power cord at all times. • When you disconnect the power cord, always pull the plug, never the cable.
Page 8
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.
3 TV overview This section gives you an overview of commonly used TV controls and functions and the Guest Menu. Side controls MENU MENU POWER : Switches the product on or off. The product is not powered off completely unless it is physically unplugged.
Access the guest menu with guest remote control MENU MENU Switch on the TV and select a TV channel. Press MENU to display the guest menu. The guest menu is displayed. »...
4 Access and use the setup menu On-screen menus help you setup and install channels on the TV, change settings, and access different features. This section describes how to access the menus and configure the TVs. When the security level is [STANDARD], you can access the PBS setup menu with the PBS setup remote control or the guest remote control.
Switch on the TV and select a TV channel. Press ‘1975’ followed by within 10 seconds. The setup menu is displayed. » Navigate the setup menu To navigate the setup menu, • Press on the remote control to select a menu. •...
Set the number of channels Set the number of channels for different kinds of programs. The total number of channels for all programs is 250. Enter the setup menu. to select [NO. OF PROGRAMS]. Press NO. OF PROGRAMS NO. OF PROGRAMS PAYTV PAYTV INFO...
Page 14
[YES]. Set the download program as the startup program to achieve a fast startup time. [TIME OFFSET]: Sets the time • offset. [BUZZER VOLUME]: Sets the • volume of the alarm buzzer. Select [OFF] to switch off the buzzer.
5 Configuration of advanced settings This section describes how to configure the advanced settings for the TV, such as the switch- on settings, picture and sound settings, energy saving, and control settings. Enter the setup menu. to select [CONFIGURATION]. Press CONFIGURATION CONFIGURATION SWITCH ON / OSD SWITCH ON / OSD PICTURE PICTURE SOUND SOUND SECURITY...
Page 16
[POWER ON]: Sets the power • mode that is used when the TV is turned on after a prolong period of no activity (see ‘Preset the switch-on power mode’ on page 16). [VOLUME INDICATOR]: Sets • the display of volume indicator (see ‘Enable or disable the volume indicator’...
Press to select [CONFIGURATION] > [SWITCH ON / OSD] > [POWER ON]. Press to select the power mode that is used when the TV is turned on from the AC mains power outlet: [LAST STATUS]: Turns on the TV in •...
[DISPLAY ON STARTUP]: Displays • ThemeTV on startup and when you press OK. Configure the picture settings Enter the setup menu. to select [CONFIGURATION] Press > [PICTURE]. Press to select one of the following options: • [BRIGHTNESS]: Adjusts the light intensity or darkness. [COLOUR]: Adjusts the color.
Page 19
‘Enable or disable video and audio output to a recording device’ on page 19). [USB BREAK-IN]: Enables or • disables the auto detection of USB devices. Select to [YES] automatically switch to the USB root menu when a USB device is plugged in.
[TUNER]: Sends the audio/ video • output from the tuner to another TV that is connected to your TV. [MONITOR]: Sends the audio/ video • output from a monitor to another TV that is connected to your TV. This is not available when input signal is protected with Vsecure, HDCP and Macrovision.
automatically to standby when the SCART signal is removed. • [NO]: Disables automatic detection of SCART signal. Insert RGB Enter the setup menu. Press to select [CONFIGURATION] > [CONTROL] > [ALWAYS RGB]. Press to select one of the following options: [AV1]: Allows RGB insertion in AV1 •...
6 Automatically install the channels This section describes how to install the TV channels automatically. Enter the setup menu. to select [AUTO INSTALL]. Press AUTO INSTALL AUTO INSTALL DVB-C DVB-C DVB-T DVB-T ANALOG ANALOG START START Press to select one of the following: [DVB-C]: Installs DVB-C channels.
7 Manually install the channels This section describes how to install the TV channels manually. Enter the setup menu. Press to select [PROGRAM INSTALL]. Press to manually install the channels. PROGRAM INSTALL PROGRAM INSTALL PROGRAM NO. PROGRAM NO. INPUT INPUT SYSTEM SYSTEM FREQUENCY...
to select [STORE]. Press Note • [CHANNEL OPTIONS] is available only when you select [PROGRAM INSTALL] > [INPUT] > [TUNER]. Label a channel Enter the setup menu. Press to select [PROGRAM INSTALL] > [CHANNEL OPTIONS] > [LABEL]. CHANNEL OPTIONS CHANNEL OPTIONS LABEL LABEL FINE TUNE...
8 Clone data and upgrade software This section describes how to clone the TV configuration data and download software. Enter the setup menu. to select [CLONING/ Press UPGRADE]. CLONING/UPGRADE CLONING/UPGRADE CLONING CLONING SW DOWNLOAD SW DOWNLOAD RESET RESET Press to select one of the following options: [CLONING]: Clones data from a •...
Page 26
Press to set the source and type of the software download: [SOURCE]: Select [USB] or [RF] as the • source of download. [SW TYPE]: Select one of the following • types of software for download: [SSB NVM]: Downloads SSB NVM •...
9 Healthcare This section describes how to select some of the features that are used in the healthcare industry. Enter the setup menu. Press to select [HEALTHCARE]. HEALTHCARE HEALTHCARE LOUD SPEAKER MUTE LOUD SPEAKER MUTE MULTI RC MULTI RC REMOTE COLOUR REMOTE COLOUR Press to select one of the following...
Different types of connectors may be used to connect a device to your TV, depending on availability and your needs. A comprehensive interactive guide to help you connect your product is available at www.connectivityguide. philips.com. Back connectors SPDIF SPDIF SERV.U SERV.U...
d EXT 1 (RGB/CVBS) and EXT 2 (CVBS) Analog audio and video input from analog or digital devices such as DVD players or game consoles. TV ANTENNA Signal input from an antenna, cable or satellite. AUDIO IN Audio input from devices that require a separate audio connection, such as a computer.
Use a Conditional Access Module A Conditional Access Module (CAM) is provided by digital TV service operators to decode digital TV channels. Note • If required, refer to documentation from your operator on how to insert a smart card into the Conditional Access Module.
11 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/support. Supported display resolutions Computer formats • Resolution - refresh rate: • 640 x 480 - 60Hz • 800 x 600 - 60Hz • 1024 x 768 - 60Hz • 1280 x 1024 - 60Hz (HDMI only) • 1360 x 768 - 60Hz • 1920 x 1080 - 60Hz (HDMI only) Video formats •...
12 Troubleshooting This section describes commonly encountered issues and accompanying solutions. TV power on/ off issues The TV does not power on: • Ensure that the TV is connected to the AC mains power outlet. If it does not power on, pull the plug out of the power outlet, wait for 60 seconds, plug it back and turn the TV on again.
TV for a few seconds to reset the TV to normal mode. Contact us If you cannot resolve your problem, refer to the FAQs for this product at www.philips. com/support. If the problem remains unresolved, contact Philips Consumer Care in your country as listed in the Addendum.
13 Index Audio/video out Auto SCART Card slot Channel Channel banner Channel display Lock a channel Mute a channel Name a channel Rings of channels Scrambled channel Set the number of channels Switch-on channel Clock settings Buzzer volume Display clock Download time Set time Cloning Clone data from TV to USB...
Page 35
Guest RC Multi RC PBS setup RC RC lock Remote control color RGB insertion Rings of channels Screen care Security settings High security Keyboard lock RC lock Standard security Smart power Sound settings Switch-on settings Audio language Channel banner Channel display Power mode Subtitle language Switch-on channel...