Automatically Install The Channels - Philips 26HFL5870D/10 User Manual

6 Automatically
install the
channels
This section describes how to install the TV
channels automatically.
1
Enter the setup menu.
2
to select [AUTO INSTALL].
Press
AUTO INSTALL AUTO INSTALL
DVB-C DVB-C
DVB-T DVB-T
ANALOG ANALOG
START START
3
Press to select one of the
following:
[DVB-C]: Installs DVB-C channels.
•
The [FULL SCAN] searches all
frequency spectrum and takes
approximately 2 hours. Filling
in [MODULATION] type and
[SYMBOL RATE] will speed up auto
installation.[QUICK SCAN] takes a
few minutes but it needs additional
parameters such as [NID] and
[NETWORK FREQUENCY].
[DVB-T]: Installs DVB-T channels.
•
• [ANALOG]: Installs analog channels.
[START]: Starts the automatic
•
installation of channels.
Note
•
The complete installation takes a few minutes
and up to 2 hours if DVB-C Full Scan is
enabled. When complete, the first tuned
channel appears on the TV.
EN
22
> >
> >
> >
> >