8 Clone data
and upgrade
software
This section describes how to clone the TV
configuration data and download software.
1
Enter the setup menu.
2
to select [CLONING/
Press
UPGRADE].
CLONING/UPGRADE
CLONING/UPGRADE
CLONING
CLONING
SW DOWNLOAD
SW DOWNLOAD
RESET
RESET
3
Press
to select one of the following
options:
[CLONING]: Clones data from a
•
USB storage device to a TV or a TV
to a USB storage device.
•
[SW DOWNLOAD]: Downloads
software from a USB storage device
or an RF channel.
[RESET]: Resets to setup menu
•
default settings (including channels
list).
Clone data
You can copy the configuration data from a
TV to a USB storage device or vice versa. This
enables the installer to bypass the PBS setup
menu and configure multiple TVs by simply
using the USB storage device.
1
Insert the USB storage device into the
USB connector of your TV.
2
Enter the setup menu.
3
Press
UPGRADE] > [CLONING].
4
Press
options:
•
[OPTIONS]: Selects the data to clone.
•
•
•
>
>
•
>
>
>
>
•
[USB TO TV]: Clones the data from a
USB storage device to a TV.
[TV TO USB]: Clones the data from a TV
•
to a USB storage device.
Note
•
Do not remove the USB storage device during
cloning.
•
All standard remote control functions and TV
controls are disabled during cloning.
Tip
•
Switch off the TV after cloning and restart it
for the changes to take effect.
Download software
You can download software upgrades or TV
settings from a USB storage device or an RF
channel.
1
Enter the setup menu.
2
Press
UPGRADE] > [SW DOWNLOAD].
to select [CLONING/
to select one of the following
[ALL]: Clones all data. This option
requires the longest time.
[SETTINGS]: Clones TV settings and
channels list only. Select this option
if you do not need to clone icons. It
requires a shorter time.
[THEMETV IMAGE]: Clones Theme
TV icons.
[MOVIE BAR IMAGE]: Clones
Movie Bar icons.
to select [CLONING/
EN
25