Turning On And Turning Off Ups - ION F-18 User Manual

5.3 Turning on and Turning off UPS

Attention: The UPS could only be turning on while connecting with the utility
at the first time.
Attention: Please switch off the connected loads first before turning on the
UPS, and switch on the loads one by one after the UPS is turned on. Switch
off all of the connected loads before turning off the UPS.
5.3.1 Turning on UPS with utility
1) Check all the connection is correct.
2) When UPS is powered on, the fan begins to rotate, LCD will show the
welcome symbol. Then LCD will show the default UPS status summary
screen after UPS finishing self-test.
3) By pressing
will beep 1s, UPS starts to turn on.
4) A few seconds later, the UPS turns into Line mode. If the utility power is
abnormal, the UPS will transfer to Battery mode without output
interruption of the UPS.
5.3.2 Turning on UPS without utility
1) Check all the connection is correct.
2) By pressing
would be powered on. At this time the fan begins to rotate, LCD will show
the welcome symbol. Then LCD will show the default UPS status
Fig. 5-13 Battery Fails
button continuously for more than 1 second, the buzzer
button continuously for more than 100ms, the UPS
30