Table of Contents
Advertisement
summary screen after UPS finishing self-test.
3)
By pressing
will beep 1s, UPS starts to turn on.
4)
A few seconds later, the UPS turns into Battery mode. If the utility power
comes back, the UPS will transfer to Line mode without output
interruption of the UPS.
5.3.3 Turning off UPS with utility
1)
To turn off the inverter of UPS by pressing
more than 3 seconds and the buzzer will beep 3s. The UPS will turn into
no output or bypass mode at once. At this time
if bypass is enable
2)
When completing the above action, UPS output voltage is still present. In
order to cut off the UPS output, simply cut off the utility power supply. A
few seconds later, LCD display shuts down and no output voltage is
available from the UPS output terminal.
5.3.4 Turning off UPS without utility
1)
To power off the UPS by pressing
3 second, and the buzzer will beep 3s. The UPS will cut off the output at
once.
2)
A few seconds later, LCD shuts down and no voltage is available from the
UPS output.
5.4 LCD operation
Except the default UPS status summary screen, the user could get more
useful information about UPS current status, detailed various measurements,
old events which ever occurred, UPS own identification, and could change the
settings to fit the user own requirements, optimize the function of UPS.
5.4.1 The main menu
In the default UPS status summary screen, when pressing
detailed information about alarm, battery would be shown.
In the default UPS status summary screen, when pressing
button continuously for more than 1 second, the buzzer
，
D isconnect the utility power to turn off the output
31
button continuously for
the UPS might has output
，
button continuously for more than
。
or
<1s, the
>1s, the
Hide quick links:
Advertisement
Table of Contents
