Mitsubishi MELSEC FX3U Series Handbook page 35
Hide thumbs
Also See for MELSEC FX3U Series:
- Programming manual (890 pages) ,
- User manual (476 pages) ,
- Hardware manual (8 pages)
Table of Contents
Advertisement
Operating procedure
1.
Start up GX Works3.
2.
Open the project of FX3U/FX3UC.
Select [Project][Open Other Format File][GX Works2 Format][Open Project]Project (***.gxw).
3.
The following message is shown. After checking the contents, press the [OK] button.
• The display contents may vary depending on the version of the software.
• Precautions for the converted project are displayed. Please read carefully through the contents before use.
4 Conversion of the Projects
4.1 Operation Method for Replacing Projects
4
33
Advertisement
Table of Contents
