Handling The Product - GE AF-300 P11 User Manual

1.3 Handling the Product

(1) Removing the Cover
For drives 30HP or less, loosen the cover mounting screws, then remove the cover by pulling from the top (see Figure
1.3.1).
For drives 40HP or more, first remove the six cover mounting screws, then remove the cover.
Mounting screws of service
cover (6 positions total)
(2) Removing the Keypad Panel
After removing the cover as explained in (1), loosen the keypad panel mounting screws and remove as shown in Figure
1.3.3 for drives 30HP or less.
For drives 40HP or more, loosen the keypad panel mounting screws and remove, using the finger holds on the keypad
panel case.
Fig.1-3-1 Removing the Cover (for drives of 30HP or less)
Fig.1-3-2 Removing the Cover (for drives of 40HP or more)
Fig.1-3-3 Removing the Keypad Panel (for drives of 30 HP or less)
Keypad panel case
Fig.1-3-4 Removing the Keypad Panel (for drives 40HP or more)
1-2
Mounting screws of
Keypad panel
Data subject to change without notice 7/07. © 2007 GE Drives