GE AF-300 P11 User Manual page 40

Table 4.2.1 Overview of Contents Displayed for each Level
No. Level name Content
1 Operation Mode This screen is for normal operation. Frequency setting from the keypad panel and LED monitor switching are
possible only when this screen is displayed.
2 Program Menu Each function of the keypad panel is displayed in menu form and can be selected. By selecting the desired
function from the list and pressing
functions are available as keypad panel functions (menus).
No.
3 Screen for each
Function
4 Supplementary
individual
Data subject to change without notice 7/07. © 2007 GE Drives
FUNC
DATA
Menu Name Purpose
1 DATA SET The code and name of the function are displayed. Selecting a function
displays a data setting screen for checking or modifying data.
2 DATA CHECK The code and name of the function are displayed. Select a function to display
a screen for checking data. Modifying data is possible as described above by
going to the data setting screen.
3 OPR Can check various data on the operating status.
4 I/O CHECK Can check the status of analog and digital input/outputs for the inverter and
options as an I/O checker.
5 MAINTENANCE Can check inverter status, life expectancy, communication error status, and
ROM version information as maintenance information.
6 LOAD FCTR Can measure maximum and average current and average breaking force in
load rate measurement.
7 ALM INF Can check the operating status and input/output status at the latest alarm
occurrence.
8 ALM CAUSE Can check the latest alarm or simultaneously occurring alarms and alarm
history. Selecting the alarm and pressing
troubleshooting.
9 DATA COPY Places the function of one inverter in memory for copying to another drive.
The function screen selected on the program menu appears, hence completing the function.
Functions not completed (e.g., modifying function data, displaying alarm factors) onScreen
function screens are displayed on the supplementary screen.
the corresponding function screen is displayed. The following
4-3
FUNC
displays alarm contents for
DATA