Table of Contents
Advertisement
12
Instead of using the following procedure, you can also enter the VoIP access data using your
PC (steps
to
8
11
>
Launch the Web browser on your PC.
>
Enter the URL http://www.Gigaset-config.com in the address field of the Web browser
and press the Return key.
You are connected to your base station's Web configurator. You will find a description of this
in the user guide on the enclosed CD.
Precondition for the following steps:
Before being able to use VoIP for making/receiving calls, you will need to provision and
activate a VoIP account.
>
Set up a VoIP account with a VoIP provider.
>
Have the VoIP account information you received from your VoIP provider at hand.
You will need:
>
Your registration name (login ID), your password and, if applicable (provider-dependent),
a user name (often this is your VoIP phone number).
8
Starting the configuration process
When your handset is sufficiently charged (approx. 20 minutes after you have placed it in the
charging cradle), the Message key
*
Automatic configuration:
If your provider supports "automatic configuration", you will receive an "auto-configuration code" instead
of an authentication name and password.
VoIP configuration with an auto-configuration code is described in the user guide on the enclosed CD.
After configuration, please proceed as described in section
Saving VoIP access data
:
)
f
*
on the handset flashes.
>
Press the Message key
.
12
f
on the handset.
Advertisement
Table of Contents
