Table of Contents
Advertisement
Handset settings
¤
Click on Apply.
Note:
If errors occur during the connection setup to
the incoming Email server or when transfer-
ring the Email messages, a corresponding
error message will be displayed. It is displayed
if you click on the f message key. Confirm
the message by clicking on §OK§.
Controlling the scope of the receipt of
Emails
In order to avoid memory bottlenecks,
your handset is configured so that a maxi-
mum of 99 messages can be received per
Email check. The handset stores up to 99
Kbytes of each Email message received.
You can change the maximum number
and size.
¤
Open the following Web page:
¢
User
Email Settings
¢
Advanced
Settings.
¤
In the field
Maximum size to be received
(kBytes), state the maximum size in
kByte of each received Email that is to
be stored in the handset. Specify a
value between 1 and 99.
¤
Enter the maximum number of mes-
sages that the handset should receive
per Email check in the
recent messages to be fetched
can enter a value between 1 and 99.
¤
Click on Apply.
Saving messenger access data
In order for you to use your handset's mes-
senger to go online and chat on the Inter-
net (page 53), you must save the address
of the messenger server and your access
data on the handset via the Web configu-
rator. The handset uses this data to estab-
lish a connection.
86
Number of most
field. You
You can determine a
a
for your handset. Both are
Priority
required if you are logged in (online) with
the messenger server with several devices
(WLAN handset, desktop PC and note-
book) at the same time using the same
User
ID.
The name is used to distinguish between
the devices. The handset cannot log in
with the messenger server if it does not
have a resource name.
You should assign a Priority, because each
message is only sent to one device per
user ID. The
Priority
receives the message.
¤
Open the following Web page:
¢
User
Messenger
¤
Specify the IP address or DNS name of
the messenger server you are regis-
tered with for instant messaging in the
Messenger Server
¤
Enter the user ID and password with
which you are registered with the mes-
senger server in the
Password
fields.
¤
Specify a name and the priority for your
WLAN handset in the
Priority
fields. Select a number between
1 (highest priority) and 9999 (lowest
priority) for the priority.
¤
Click on Apply.
Importing/exporting
ringtones/pictures
You can transfer your own ringer tones,
pictures (screen pictures) which you have,
for example, downloaded from the Inter-
net, from your PC to the handset and use
them there.
Likewise, you can save ringer tones and
pictures (screen pictures, photos etc.)
from your handset to your PC.
name and
Ressource
decides which device
settings.
field.
and
User ID
and
Ressource
Advertisement
Table of Contents
