Saving Voip Access Data - Gigaset A580 IP User Manual

Saving VoIP access data

Instead of using the following procedure, you can also enter the VoIP access data using your PC
(steps :
to )
7 11
>
Launch the Web browser on your PC.
>
Enter the URL http://www.Gigaset-config.com in the address field of the Web browser and
press the return key.
You are connected to your base station's Web configurator. You can find a description of the Web
configurator in the user guide on the enclosed CD.
Precondition for the following steps:
Before you can use VoIP to phone any other subscribers on the Internet, the fixed line network or
the mobile phone network, you need a VoIP account.
>
Set up a VoIP account with a VoIP provider.
>
Have the VoIP account data you received from your VoIP provider to hand.
You will need:
>
Your registration name (login ID), your password and, if applicable (provider-dependent), a user
name (often this is your VoIP phone number).
Or
>
Your personal auto-configuration code (activation code), if your provider supports "automatic
configuration".
7
Starting the configuration process
If "Update firmware?" is shown in the display, an updated firmware is already available on the
Internet for your phone. Press the right-hand display key §Yes§.
The new firmware is loaded. The process takes approx. 3 minutes. The message key
now flash again.
>
Press the message key
When your handset is sufficiently charged
(approx. 20 minutes after you have placed it in the charg-
ing cradle), the message key
>
Press the message key
f
to start configuration.
f
on the handset flashes.
f
on the handset.
f
9
will