Menu Setting Control - Camos CNT-701 Owner's Manual

Function

MENU SETTING CONTROL

Press Menu Button repeatedly to show MENU SETTING on the screen.
Press Cursor Up / Down Button to select the desired item.
Press Cursor Left / Right Button to change the item's value or level.
1. TV SYSTEM
2. DISPLAY MODE
3. OSD TIMEOUT
4. TRANSPARENCY
5. LANGUAGE
6. VIDEO3 MIRROR
Even if VIDEO3 MIRROR mode is set to 180 and input mode selected to RVC, screen
will be changed to normal display mode when enter the MENU pages.
7. FACTORY RESET
For memorizing re-adjusting value, press MENU button and exit MENU SETTING page.
TV & AUDIO related menu setting values are remains the previous setting value.
14
: TV output type select (AUTO, PAL, NTSC)
: The picture is shown as 4:3 or 16:9 sized screen.
: The OSD TIMEOUT can be adjusted from 5SEC ~ No time out.
"00" value is no time out. The default set is 10 seconds.
: It is adjusted from 00 ~ 100 and the background transparency is adjusted.
: The OSD language is selectable.
(ENGLISH / KOREAN
: Each time you press this button, VIDEO3 MIRROR mode will be changed
as follows.
180 0
When you set VIDEO3 MIRROR 180 and input mode selected to RVC,
the screen will be show mirror looking image. It is useful when a rear view
camera is connected to RVC input.
: When you press this button, following menu setting values are reset to
factory default condition.
PICTURE CONTROL
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
TINT
DIMMER
AUDIO CONTROL
VOLUME
FM OUTPUT
MENU SETTING CONTROL
TV SYSTEM
DISPLAY MODE
OSD TIMEOUT
TRANSPARENCY
LANGUAGE
VIDEO3 MIRROR
50
50
17
50
50
STANDARD
40
OFF
NTSC
16 : 9
10
40
ENGLISH
0