Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Related Manuals for Camos CM-709M2
Summary of Contents for Camos CM-709M2
- Page 1 CM-709M2 7” 4CHANNEL DIGITAL MONITOR INSTRUCTION MANUAL Thank you for purchasing this product. INSTRUCTION MANUAL For proper usages and application, Please read this instruction manual thoroughly. ver. 1.0 PRINTED IN KOREA...
-
Page 2: Table Of Contents
SAFEGUARD INSTRUCTIONS CONTENTS 7” 4CHANNEL DIGITAL MONITOR Please read the “Safety Rules” carefully before using this product. Following the safety rules prevents users from damages related with the misuse of the product. It is very important to follow these safety rules. We state “Caution” and “Warning” to clarify any potential risk for a damage associated with the misuse of the product. -
Page 3: Feature
FEATURE 7” 4CHANNEL DIGITAL MONITOR • 7” Wide digital TFT LCD with high resolution and low reflection WARNING • All functions are displayed on screen (OSD function) • 5 language display (ENG-DEU-ITA-FRA-ESP) Do not install the product where sudden temperature increasing could be and use •... -
Page 4: Function Of Each Part
FUNCTION OF EACH PART 7” 4CHANNEL DIGITAL MONITOR [MONITOR] [REMOTE CONTROLLER] ② ① ⑤ ③ ⑥ ④ ⑧ ⑦ ⑨ ⑫ ⑩ ⑪ SENSOR POWER DIMMER MODE DOWN/UP MENU (REMOTE) SENSOR ① IR-SENSOR IR-SENSOR ① POWER Power On/Off ② AV Go into AV mode directly and change AV input ②... -
Page 5: Function
FUNCTION 7” 4CHANNEL DIGITAL MONITOR POWER ON/OFF MUTE ON/OFF Press MUTE[ ]button on remote control for MUTE function ON/OFF. When MUTE is ON it will be displayed. It disappears for a while OSD MENU is used. ※ When user controls volume while mute function is set, the mute function turns off. - Page 6 2) AV mode CHANGE SPLIT MODE MODE DOWN/UP MENU POWER MODE DOWN/UP MENU POWER Each split screen has two options. On split mode, press DOWN/UP button of moni- On camera mode, press AV button of monitor or remote control then the screen tor or split screen button of remote control then the screen switches between both goes to AV mode directly.
- Page 7 SCREEN SWITCH WHILE TRIGGER INPUT 3) When there is the TRG3(Rear light) input, CAM3 will be shown as full screen and user can also choose 2 split screen. <Trigger input> or <trigger signal> is when a circuit works by a signal, for example ※...
-
Page 8: Settings
SETTINGS 7” 4CHANNEL DIGITAL MONITOR Video Standard System, NTSC/PAL conversion 5) When there is an input signal of more than 2 triggers, the monitor displays fully connected screen (Trigger input screen) as the priority order. And the screen If use PAL system on NTSC system using country, it may cause a malfunction. This switsches back when the signal switsches off, the rest will be displayed as the products can convert NTSC/PAL system manually but it is not automatic. - Page 9 Brightness and Contrast setting Initialization User can control CONTRAST/BRIGHTNESS/COLOR/TINT. ※ It initializes monitor as from the factory mode. (Except on Video Standard System, ※ Each menu is set 50 from the factory. NTSC/PAL) MODE DOWN/UP MENU POWER MODE DOWN/UP MENU POWER 1) Press SETUP button of remote control 1) Press SETUP button of remote control PICTURE SETUP...
-
Page 10: Connecting And Installation
CONNECTING AND INSTALLATION 7” 4CHANNEL DIGITAL MONITOR Screen Information ⑤ TAPPING SCREW T1 M4.0 X 12 (3ea) INSERT BOLT (2ea) FLAT WASHER M3 (4ea) MODE DOWN/UP MENU POWER Press MENU button of monitor or RECALL button of remote control, then it displays actual screen information (Input mode / Audio output / Volume). -
Page 11: Specification
SPECIFICATION 7” 4CHANNEL DIGITAL MONITOR NTSC Screen size 7 inch WVGA (800 X 480) Resolution LCD Panel Brightness 250 cd/m Contrast ratio 400 : 1 70/70/45/55 View angle(L/R/U/D) DC 12V-24V Voltage Power supply Current 500mA (DC 12V, monitor set only) Input system NTSC/PAL Horizental... - Page 12 MEMO MEMO 7” 4CHANNEL DIGITAL MONITOR 7” 4CHANNEL DIGITAL MONITOR...