Laguna Tools MPLAN1510-0120 Manual page 48

Connecting the electrical supply.
Note. A qualified electrician must carry out the installation.
Power termination box
Cover removed
Ensure that the electrical supply corresponds with that of the machine (single-phase
220 V).
It is recommended that you use a 30-amp mains breaker.
The mains cable must be connected into the power termination box.
Note. The machine is not normally supplied with an electrical cable or plug, as
the type of plug and the length of the cable will be dependent on the
installation.
Connecting the dust collection.
Connect a 4-inch flexible hose between the
dust collection hood and your dust collector.
Once fitted, pull on the hose to ensure that
the connection is tight. You do not want it to
come off during production.
Note. You will need a dust collection system
with a minimum of 1000-cubic-feet-per-
minute capacity. The stronger the dust
collection the better, as the machine is
Dust collection hood
capable of producing a lot of waste.
12