General Operating Instructions - NuWave PIC TITANIUM Owner's Manual

General Cleaning Instructions:
• Unplug the unit before cleaning.
• Clean after each use.
• Make sure unit has cooled completely prior to cleaning.
• The outer surface may be cleaned by wiping carefully with a damp dishcloth or
sponge.
• Remove the power plug prior to cleaning the NuWave PIC Titanium. Do not
use caustic cleaning agents and water should not penetrate the interior of the
induction cooktop.
• Never immerse the NuWave PIC Titanium, its cables or plug in water or
other liquids.
• Wipe the glass surface with a damp cloth or use a mild, non-abrasive soap
solution. Make sure the unit has cooled completely before cleaning.
• Wipe casing and operating panel with a soft cloth dampened with water or a
mild detergent.
• Do not use oil-based cleansing products as their use may damage plastic parts
or the casing/operating panel.
• Do not use flammable, acidic or alkaline materials or substances near the
NuWave PIC Titanium, as this may reduce the service life of the induction
cooktop or pose a fire risk when the induction cooktop is in use.
• In order to keep your NuWave PIC Titanium looking like new, take measures
to ensure that the bottom of cookware does not scrape the unit's glass surface,
although a scratched surface will not impair the use of the induction cooktop.
• Make sure to properly clean the unit before storing it in a cool, dry place.
IMPORTANT TIPS:
1. Check power outlets to ensure proper operation. Do not use in an outlet
where other major appliances are engaged. Check settings if the unit is
cooking too slowly.
2. The electrical plug must be properly plugged into the outlet.
3. Always turn off and unplug the unit before wiping.

General Operating Instructions:

• Place the cooktop on a stable, level, non-metallic surface.
• Never use the cooktop on a flammable surface (e.g. table cloth, carpet, etc.).
• Do not block the ventilation slots of the induction cooktop. This may cause the unit
to overheat. Maintain a minimum distance of 3-5 inches from walls and other
objects, appliances, etc.
• Do not place devices or objects that are sensitive to magnetic fields on top of or next
to the NuWave PIC Titanium (e.g. credit cards, cell phones, radios, TVs,
video recorders, etc.).
• Do not use the induction cooktop in the proximity of open fires, heaters or other heat
sources.
• Do not place on stove top.
• Ensure that the power cable is not damaged or compressed beneath the induction
cooktop.
• The power cable must not come into contact with sharp edges and/or hot surfaces.
• Prior to connecting the NuWave PIC Titanium, confirm that the voltage needs
indicated in this manual correspond to the voltage supply in your home. A wrong
connection may lead to the unit's damage and possible injury to persons.
• The cooktop's surface is designed from temperature-resistant glass. In the event
that damage to the unit is observed, even a small crack on the glass surface,
immediately disconnect the NuWave PIC Titanium from the power supply.
Owner's Manual • 11 • 11