Setting up
1.
Align the H5i with the VPAP ST-A and push them together until they click into place.
2. Connect the DC plug of the power supply unit to the rear of the device.
3. Connect the power cord to the power supply unit.
4. Plug the other end of the power cord into the power outlet.
5. Connect one end of the air tubing firmly onto the air outlet.
6. Connect the assembled mask system to the free end of air tubing.
Notes:
•
Always ensure that the VPAP ST-A and H5i are placed on a stable, level surface for proper operation.
•
Always ensure that the VPAP ST-A is placed in an area where the alarm LED indicators are clearly
visible.
•
Place the power supply unit away from the H5i to allow for adequate ventilation.
14