Rear - Brother GT-3 SERIES Basic Operation Manual

2-3. Rear

No. Name
1 AC cord socket
2 USB port
3 LAN port
4 Rear Cover
5 Waste Liquid Tube
6 Waste Ink Tank
Inserts AC cord.
Inserts USB cable to PC.
Inserts LAN cable to PC.
Covers the Platen moving area.
Drains the waste ink.
Insert Waste Liquid Tube (2) and Tube Stopper (3) into Waste Ink Tank (1).
 Shorten the Waste Liquid Tube located inside the Waste Ink Tank to an
appropriate length (4 to 5 cm).
 Be careful so as not to bend the Waste Liquid Tube.
Otherwise, the waste liquid is less likely to flow.
Holds the waste ink. Be aware of the room.
 Discard the waste liquid before cleaning the tube.
(Or, check that the waste liquid amount is less than one half of the tank.)
If the Waste Liquid Tube soaks up the waste liquid, the liquid may leak from
the device side when cleaning the tube.
GT-3 Series
2. Identifying Your Printer's Parts
Description
0045Y
0856D
10