Brother GT-3 SERIES Basic Operation Manual page 85

(2) Remove the used Ink Cartridge from the slot of the printer. Put your finger to the handle and pull out the Ink
Cartridge.
<Note>
Leave the used Ink Cartridge installed until just before the replacement. Leaving your printer with no Ink
Cartridge installed may cause ink leakage or other serious damages.
(3) Confirm the direction and the color of the new Ink Cartridge and put the bottom edge on the base and slide it
to the back of the slot.
<Note>
Confirm the color of the ink cartridge. Loading a wrong color causes serious damage to print quality, and
could damage to the Print Heads. If you have installed a wrong color, immediately contact Brother or your
dealer for a service call.
(4) When replacing the White, Cyan or Magenta Ink Cartridge, clean the Caps and Wipers and replace the Wiper
Cleaners with the ones packed together in the Carton according to our maintenance schedule to maintain
good print quality. See "5-2-1." and the following pages. This is really important to keep your printer in good
condition.
<Note>
 Do not repeat unnecessary uninstalling / installing the Ink Cartridge.
 Dispose the used Ink Cartridge in compliance with your local regulations.
GT-3 Series
5. Maintenance
Handle
0055Y
0056Y.0057Y
76