Specifications; Pressure Washer Specifications; Engine Specifications; Oil Specifications - Champion Power Equipment 100310 Operator's Manual

100310 - 3000 PSI PRESSURE WASHER
SPECIFICATIONS
Pressure Washer Specifications
Model .......................................................................... 100310
Max Pressure ............................................................3000 PSI
Max Volume ...............................................................2.5 GPM
Max Water Temperature .................................... 60º C (140º F)
Fuel Capacity ....................................................3.4 L (0.9 gal.)
Gross Weight .................................................34.9 kg (76.9 lb.)
Net Weight .......................................................31 kg (68.3 lb.)
Height ..........................................................97.2 cm (38.3 in.)
Width ...........................................................46.7 cm (18.4 in.)
Length.............................................................68 cm (26.8 in.)
Engine Specifications
Model ............................................................... YF168F-2-000
Displacement ................................................................196 cc
Type ...................................................................4-Stroke OHV
Start Type ....................................................................Manual
Oil Specifications
DO NOT OVERFILL.
Type . . . . . .. .. .. .. .. ... .. .... ... .... .... .... .... .
Capacity .. .. .. .. ... .. .. .. .. ... .... .... .... ..... ....
Degrees Celsiusº (Outside)
Full Synthetic 5W-30
Degrees Fahrenheitº
Weather will affect engine oil and engine performance.
Change the type of engine oil used based on weather
conditions to suit the engine needs.
*See chart below
.0.6 L (0.6 qt.)
(Outside)
NOTICE
Fuel Specifications
Use unleaded gasoline intended for motor vehicle use with
a minimum octane rating of 85 or higher. Never use fuel
containing more than 10% ethanol. DO NOT USE E15 or E85.
DO NOT OVERFILL.
Gasoline Capacity .. ...... ..... ...... ..... ...... ..
Spark Plug Specifications
OEM Type ..... ..... ...... ...... ..... ...... ..... .....
Replacement Type .. ..... ...... ..... .
Gap .... ..... ...... ..... ...... .....
Valve Specifications
Intake Clearance .. ..... ...... .
Exhaust Clearance . ...... .....
A technical bulletin regarding valve adjustment procedures
is available at www.championpowerequipment.com.
Important Message About Temperature
Your Champion Power Equipment product is designed and rated
for continuous operation at ambient temperatures up to 40°C
(104°F). When your product is needed it may be operated at
temperatures ranging from 5°F (-15°C) to 122°F (50°C) for
short periods of time. If exposed to temperatures outside this
range during storage, it should be brought back within this
range before operation. In any event, the product must always
be operated outdoors, in a well-ventilated area and away from
doors, windows and vents.
SPECIFICATIONS
3.4 L (0.9 gal.)
NHSP F6RTC
NGK BPR6ES or equivalent
0.7-0.8 mm (0.028-0.031 in.)
0.13-0.17 mm (0.005-0.007 in.)
0.18-0.22 mm (0.007-0.009 in.)
NOTICE
20