Table of Contents
Advertisement
Colibri Manual Ver. 4.2
LX Navigation d.o.o.
9.2 Data transfer through USB
Always connect the Colibri to the PC with the USB cable, and then run LXe. Never do the opposite. When LXe
is running, then select the com port.
If the same baud rate is selected on the PC and the Colibri, connection will establish automatically. The
program is then ready to transfer data between the Colibri and the PC.
Never disconnect the Colibri from the USB while LXe is running!
To disconnect the Colibri click "Disconnect USB Serial Port" or close LXe.
9.3 Troubleshooting the Colibri/USB connection
The Colibri/USB port is not shown in the LXe program.
•
Please check to ensure you have the latest version of LXe
•
Check that the USB driver is installed properly. (Control Panel – System – Hardware – Device
manager)
On the left panel the USB Serial port is not installed; on the right panel the serial port is correctly installed.
If Windows cannot find a driver for the USB serial port.
•
Please check to ensure that your LXe CD has a USB Drivers folder.
•
Let Windows search for a driver on the internet.
Note!
Note!
32
Dec 2006
www.lxnavigation.si
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Colibri and is the answer not in the manual?
Questions and answers