Turbo Function Setting; Save Function Setting - Daikin FDM24PEVLK Operation And Installation Instructions Manual

5.9 Turbo Function Setting

Turbo function: The unit at high fan speed can realize quick cooling or heating so that room temperature can
quickly approach setting temperature.
In cooling or heating mode, press Function button till the unit enters turbo function and then
press Enter/Cancel button to turn on turbo function.
During turbo function, press Function button till the unit enters turbo function and then press
Enter/Cancel button to cancel turbo function.
Turbo function setting is shown in Fig.5.9:
Turn on the unit, without
turning on turbo function
Note:
1. Turbo function will be turned off after power failure and then recovery. In dry, fan and auto mode, turbo
function can not be set and TURBO mark won't be displayed.
2. Turbo function will be automatically canceled after setting of quiet function.

5.10 Save Function Setting

Energy Saving Function: Energy saving result that the air conditioner runs in smaller temperature range is
Energy Saving Setting for Cooling
Under on-state and in cooling or dry mode of the unit, press Function button into energy saving function,
SAVE blinking. Press
After that press Enter/Cancel button to turn on energy saving function for cooling.
Energy Saving Setting for Heating
Under on-state and in heating mode of the unit, press Function button into energy saving function, SAVE
blinking. Press Mode button into energy saving function for heating and then press
upper limited value of setting temperature in heating mode. Then, press Enter/Cancel button to turn on
energy saving function for heating.
16
Press "Function" button
into turbo function
Press "Enter/Cancel" button
to turn off turbo function
Fig. 5.9 Turbo Function Setting
realized by setting lower limited value of setting temperature in cooling or dry mode
and upper limited value in heating mode.
or button to adjust lower limited value of setting temperature in cooling mode.
Press "Enter/Cancel" button
to turn on turbo function
Press "Function" button
into turbo function
or button to adjust
English