Daikin FDM24PEVLK Operation And Installation Instructions Manual page 19

After energy saving function is turned on, press Function button into energy saving function and press
Enter/Cancel button to cancel this function.
The energy saving setting is shown in the Fig.5.10.
Turn on the unit, without
turning on save function
Press "Enter/Cancel" button
to turn off save function
Note:
1. In auto running mode with save function on, the unit will forcibly quit auto running mode and change to
current operation mode. After setting of SAVE, sleep function will be canceled.
2. In save mode, if Function button is pressed or there is not any operation within 5s after the last button
operation, the system will quit from save function setting and current data won't be memorized.
3. After power failure and then recovery, save function setting will be memorized.
4. The lower limited value in cooling mode is 16°C and the upper limited value in heating mode is 30°C.
5. After save setting, if the setting temperature is out of the range in the mode, the limited value will prevail.
English
Press "Function" button
into cooling save function
Press " " or " " button
to change the upper limit
of heating
Fig. 5.10 Energy Saving Setting
Press " " or " " button
to change the lower limit
of cooling
Press "Mode" button into
heating save function
17