Daikin FDM24PEVLK Operation And Installation Instructions Manual page 30

9.2.2 Installation of Indoor Unit
(1) Insert a M10 expansion bolt into the hole. Drive a nail into the bolt. Refer to the profi le dimensions drawing
of the indoor unit for the distance between the holes. Refer to Fig. 9.1 for the installation of the expansion
bolt.
(2) Install the hook onto the indoor unit as Fig. 9.2 shows.
(3) Install the indoor unit at the ceiling as Fig. 9.3 shows.
Air Intake
PRECAUTIONS
1. The preparation of all pipes (
controller, indoor unit and outdoor unit) must be ready before the installation, so as to achieve smooth
installation.
2. Drill an opening on the ceiling. Maybe it is required to support the ceiling to ensure the evenness of it and
avoid the vibration of it. Consult the user or a construction company for details.
3. In case the strength of ceiling is not enough, use angle iron sections to set up a beam support. Place the
unit at the beam and fi x it.
28
Ceiling-mount
Screw
Fig. 9.1
Fig.
the refrigerant pipes and drainage pipes) and cables (connecting lines of wired
Air-conditioning Unit
Hook
Fig. 9.2
Screw
Hook
Nut
Air Supply
9.3
Enlargement
English