Daikin FDM24PEVLK Operation And Installation Instructions Manual page 34

2. During connection, remove the plastic seal cap at one end of the throttle valve ( Part 8 in the above Fig.9.7)
3. Remove the end cap of liquid pipe joint (Note: Flange is equipped with the liquid pipe joint of ducted type unit)
4. Confi rm the specifi cation of cooling/heating throttle orifi ce according to model of the unit
(marked on the unit).
Model of Unit
FDM24PEVLK
FDYM24PEVLK
FDM30PEVLK
FDYM30PEVLK
FDM36PEVLK
FDYM36PEVLK
FDM42PEVLK
FDYM42PEVLK
FDM48PEVLK
FDYM48PEVLK
5. Installation of cooling throttle orifi ce
Put the cooling throttle orifi ce confi rmed according to above table onto the valve base of liquid pipe joint.
Notice! Pay attention to specifi cation and installation direction of throttle orifi ce.
6. Installation of heating throttle orifi ce
Put the heating throttle orifi ce confi rmed according to the above table onto the valve base A of throttle
orifi ce.
Notice! Pay attention to specifi cation and installation direction of throttle orifi ce.
32
End cap Joint
Fig. 9.8
Cooling Throttle Orifi ce Heating Throttle Orifi ce
56#
65#
69#
81#
83#
Cooling throttle orifi ce
Fig. 9.9
Joint Valve base A
Fig. 9.10
Liquid pipe
47#
60#
58#
65#
76#
Seal gasket
Heating
throttle orifi ce
English